 |
NEW | |
|
|
|
|
|
SHOPPING | |
|
|
|
|
|
KINGYOUP CHINA | |
|
|
|
|
|
|
 |
|
|
|
|
|
The zoom stereo microscope can be freely changed the magnification ratio, which remains in clear, sharp focus and enables to observe better, more quickly and more conveniently..... |
|
|
| |
|
|
|
|
|
Non-Contact Depth Measuring Microscope System DH2/IMH | |
|
High-precision non-contact depth measurement is possible with observing the surface of measuring point, by very simple operation, without personal equations.....
| |
| | | | |
|
 |
|
|
|
| Light Section Depth/Thickness Measuring Microscope | |
Projection slit light, Reference slit light, and incident light are changed from tungsten lamp to durable halogen light source to ensure optimum illumination on the object surface for fatigue-free, precise measuring work.
The viewfield of object measuring surface covered by halogen light is widened and precision measuring work is possible by non-technical people without any special training.....
|
|
|
| |
|
|
|
|
|
|
| DCM-40/60 are unique microscope systems superimposing top and bottom patterns of specimen (wafer) in the view field of microscope, then comparing shift to measure the shift length by measuring system. Since the objective lenses installed at top and bottom are 5 types, ranging from 50X to 1000X in total magnification, various specimens can be observed. |
|
|
| |
|
|
|
|
| Non-Contact Thickness Measuring System | |
| THS series is a non-contact thickness/height/depth measuring system based on an optical type focal point detection method, incorporating the two microscope optical systems of the top and bottom, with precise focus indicator using index graticule. Thickness can be measured up to 10mm with observing the surface of measuring point. Because of an optical system, operations are simple, and the precise focus indicator (Target Mark) can be seen on a monitor at a just focus condition. |
|
|
| |
|
|
|
|
|
|
KH-7700 is the HIROX's newest most advanced development, the digital camera, light source, integrated LCD monitor, integrated computer and software come all together as one unit. Auto Calibration Select (ACS) feature (When you zoom in and out, the scale and calibration in the unit changes accordingly), auto z-axis stand interface, recording digital movies, capturing still images, make 2D and 3D measurements (height measurement, volume measurement and profiling etc.) are all integrated and make for greater functionality and higher speed. This unit is also great for portable applications......
|
|
|
| |
|
|
|
|
| 3D Profiling Scanning Measurement System | |
Surface Measurement and Profiling Products:
WaferScan – Wafer Bow & Warp Geometry
Applications: Semiconductor, Flat Panel Display, Optics
HRT 3000 - Non-Contact Optical Profilometer
Applications: Semiconductor, Electronic Device and Packaging, Optics, Flat Panel Display, LED, MEMS, Hard Disk Drive.....
| |
|
| |
|
|
|
|
|
|
S series the reflected light microscope is suitable to observe the microscopical surfaces of non-transparent object.....
| |
|
| |
|
|
|
|
|
|
The zoom stereo microscope can be freely changed the magnification ratio, which remains in clear, sharp focus and enables to observe better, more quickly and more conveniently. .....
| |
|
| |
|
|
|
|
| High Magnification Zoom Microscope Series | |
| Longer W.D. can achieve observing specimens being out of reach before Coaxial reflecting illumination as standard equipment can make image brighter And clearer...... |
|
|
| |
|
|
|
|
|
|
NH series are introduced into various lens industry.
Analyze curvature and roundness for sphere lens.
Analyze fitting error of design value and aspheric coefficient in an aspheric surface lens......
|
|
|
| |
|
|
|
|
|
|
The new HELIOS replaces the previous model designed in 1965,
with the traditional name are all the benefits of the original model: ACCURACY, RELIABILITY, STURDY construction but now technically updated and featuring new electronic measuring systems including PC facility and numerical control.....
|
|
|
| |
|
|
|
|
| Non-Contact 3D measurement | |
Specially designed to accurate repeatable measurement of the thickness and depth, to measure the surface profile, flatness, roughness and alignment in X, Y and Z-axis.....
|
|
|
| |
|
|
|
|
| Precise Lens Centering Measurement | |
Inspection/Measurement for the “Inclination” and Slant of the Centering” of the Both sides ( Top surface and Bottom surface) of lens Decentration at the same time......
|
|
|
| |
|
|
|
|
| Automated Vision Inspection System (AOI) | |
With over 25 years of experience in the quality control arena for factory automation, Integral Vision provides revolutionary machine vision software and systems to ensure quality by monitoring and controlling the manufacturing process.....
|
|
|
| |
|
|
|
| |
