• Fully automatic.
• Washes flat, round, and V-bottom plates and strips.
• No user adjustments required. Automatic calibration, alignment, and last row detection.
• 6 ready-to-run wash progams.
• Large, non-volatile memory stores at least 50 user-specified wash protocols.
• Precision operation with constant monitoring of vacuum and pressure. Pump cycles only when necessary for quiet operation.
• Programmable automatic rinse cycle.
• Ready to run: bottles, aerosol shield, 8-way manifold included.
• 12 and 16 position wash heads available.
• NRTL and CE certified.
Stat Fax®2600
Residual Volume
＜3ul
Processing Time
(Full Plate)
55 seconds aspirate/dispense
(8 Probe Wash Head Standard (12 or 16 Probe Wash Heads Available)
Auto Alignment - senses physical geometry of the head, plate, and carrier mechanism
Standby－disables pumps and releases vacuum and pressure
Self-Check－performs internal performance tests alignment
Auxiliary－allows selection of pre-programmed tests, mechanism
and volume calibration, and alphanumeric test naming
Constant Plate Cycle Time
Optional Manual Plate Depth Selection
Certifications
NRTL Listed, CE Mark
Awareness Technology is an ISO 13485:2003 Certified Manufacturer
High quality at low cost is not a new concept at Awareness Technology. For over 25 years, our service mark has been Cost-Effective by Design®, with no compromises in performance or reliability.
Manufacturing Facilities
30,000 sq. ft. (2800m2) Custom Designed Manufacturing Facility (completed March 2002) with：
• Complete metal working machine shop.
• Mechanical and Electrical Assembly.
• Incoming, In-Process, and Final Device Inspection.
• Laboratory.
• Expediting Services.
• 15,000 sq. ft. (1400m2) Manufacturing Facility
• 4,000 sq. ft. (370m2)Paint and Finishing Shop
