• Flip-up display screen.
• Large 240 x 128 pixel graphical display.
• Plug in standard external keyboard for easier data entry (sold separately).
• Use 40-column on-board thermal printer, external printer, or PC.
• Create a work list, run tests, print patient reports. Stores patient data.
• Shows kinetic plots in real time.
• Stores control values and creates Levey-Jennings plots for QC.
• Optical system is temperature controlled to 37C.
• Bichromatic w/ 6 filters and spaces for 2 optional filters (340-700nm).
• Adapts to use 12 mm round tubes, 1 cm square cuvettes, or built in flow cell.
• Vacuum system speeds sampling and reduces carryover.
• Calibration traceable to NIST standard.
• Stat Fax® readers use IAD filters.
Stat Fax®3300
Tube or Cuvette
-0.2 to 2.5 absorbance units
With Flowcell
-0.2 to 3.5 absorbance units
Stability
Drift of no more than 0.005A in 8 hours/biochromatic
Light Source
Tungsten halogen lamp, with lamp saver feature
Standard Wavelengths
340, 405, 505, 545, 580, 630nm plus 2 optional
Filter Types
Ultra long life multiple cavity ion deposition hard coat
Minimum Sample Volume
Tube (1 ml)、Cuvette (400 ul)、Flowcell (250 ul)
Display
Graphical LCD 240x128
Internal Printer
40/80 column thermal
Keyboard
20 key domed membrane
PC Keyboard
Compatible with standard PC keyboard
RS232
9600 8 data, 1 stop, no parity
Parallel: Any IBM compatible printer
Power
100-240 (self sensing) 50/60 HZ input: 90 watts
Processor
Z180
RAM
32k byte
Memory
1 megabyte
Operating Modes
Single and multipoint standardization
Rate (factor/standard)
Live graphical display of reaction
Curve Fit
Linear, point to point, or regression
Miscellaneous
Blank and curve recall, sample blanking
Enclosure
Fire retardant ABS and steel
Awareness Technology is an ISO 13485:2003 Certified Manufacturer
High quality at low cost is not a new concept at Awareness Technology. For over 25 years, our service mark has been Cost-Effective by Design®, with no compromises in performance or reliability.
Manufacturing Facilities
30,000 sq. ft. (2800m2) Custom Designed Manufacturing Facility (completed March 2002) with：
• Complete metal working machine shop.
• Mechanical and Electrical Assembly.
• Incoming, In-Process, and Final Device Inspection.
• Laboratory.
• Expediting Services.
• 15,000 sq. ft. (1400m2) Manufacturing Facility
• 4,000 sq. ft. (370m2)Paint and Finishing Shop
