• Accommodates 12mm tubes or cuvettes.
• Interactive touch-screen LCD with USB mouse option.
• Bichromatic optics. Standard model includes six filters - 340, 405, 505, 545, 580, and 630nm. Alternate filters available from 340nm - 700nm.
• On board curve fitting calculations with step-by-step user prompting.
• Single point calibration by standard or factor, multipoint calibration, kinetic rate by standard or factor (batch or singly).
• NRTL and CE mark.
• Stat Fax® readers use IAD filters.
Stat Fax®4500
Linear Measurement Range
-0.0 to 3.0 Absorbance Units (A)
Photometric Accuracy
+/- (1% of the reading + 0.005 A)
Stability
Drift of no more than 0.005A in 8 hours/bichromatic
Light Source
Tungsten lamp with lamp saver feature
Standard Wavelengths
340、405、505、545、580、630
Type of Filter
IAD hardcoat interference, 10nm half bandpass
Tube Size
12 mm round is standard
Display
Interactive touch-screen 3.5” LCD, color graphic display
Printer
Thermal dot matrix, with graphic capability
Power Requirements
115V or 230V AC, 50-60 Hz (universal input)
Speed
Reads, calculates and prints results in 3 seconds/tube
Calculation Modes
Single point calibration by standard or factor, multipoint calibration with point-to-point curve fit, rate by standard or factor (batch or singly)
Test Menu
More than 50 open channels to store tests. Stores all parameters including wavelengths, calculations, unit codes, linear and normal ranges, rate timing, standard values, test names, and previous standard curve.
Temperature
Read cell and incubation block, user selectable
Enclosure
Painted flame-retardant ABS plastic cover with metal base.
Dimensions
Approximately 9 x 13.5 x 5 in. (24 x 34 x 13 cm) 10 lbs. (4.5 kg)
Certifications
NRTL listed, CE Mark
Awareness Technology is an ISO 13485:2003 Certified Manufacturer
High quality at low cost is not a new concept at Awareness Technology. For over 25 years, our service mark has been Cost-Effective by Design®, with no compromises in performance or reliability.
Manufacturing Facilities
30,000 sq. ft. (2800m2) Custom Designed Manufacturing Facility (completed March 2002) with：
• Complete metal working machine shop.
• Mechanical and Electrical Assembly.
• Incoming, In-Process, and Final Device Inspection.
• Laboratory.
• Expediting Services.
• 15,000 sq. ft. (1400m2) Manufacturing Facility
• 4,000 sq. ft. (370m2)Paint and Finishing Shop
