Linear Measurement Range

-0.20 to 2.50 Absorbance Units (A)

Photometric Accuracy

+/- (1% of the reading + 0.005 A)

Stability

Drift of no more than 0.005A in 8 hours/bichromatic

Light Source

Tungsten halogen lamp, with lamp saver feature

Standard Wavelengths

340、405、450、505、545、630

Type of Filter

IAD hardcoat interference, 10nm half bandpass

Tube Size

12 mm round is standard

Display

Alpha numeric, 16 character LCD

Printer

Thermal dot matrix, 20 characters per line, plus graphics

Keyboard

16-key, domed membrane switch, enunciating

Power Requirements

115V or 230V AC, 50-60 Hz (switch selectable)

Microprocessor

Z180

Speed

Reads, calculates and prints results in 3 seconds/tube

Calculation Modes

Single point calibration by standard or factor, multipoint calibration with point-to-point curve fit, rate by standard or factor (batch or singly)

Test Menu

More than 50 open channels to store tests. Stores all parameters including wavelengths, calculations, unit codes, linear and normal ranges, rate timing, standard values, test names, and previous standard curve.

Temperature

37℃, block stays on, cell has on/off switch

Enclosure

Painted flame retardant ABS plastic cover with metal base.

Dimensions

Approximately 9 x 13.5 x 5 in. (24 x 34 x 13 cm) 10 lbs. (4.5 kg)

Certifications

NRTL listed, CE Mark